Lower School Cameras

Hardware

MCAIPCAM1 or 10.10.10.9

Viewing

To view cameras: Find the login information in our IT Manual.

Configuring cameras

To configure each camera using MCAIPCAM1, run Axis IP Utility, then select the camera to configure and login using information from IT Manual.

Setup

the default Axis camera IP is 192.168.0.90. Put a laptop on the 192.168.0.x LAN to access camera and configure.

Subnet Mask:`255.255.255.0`
Default Router:`192.168.1.254`

Resetting

To reset camera, press and hold control button for 15 seconds while powering on until amber light stops flashing.

Orchid

Servers:

• MCACAM1 10.10.10.19 192.168.1.254
• MCACAM2 10.10.10.9 192.168.1.253
• MCACAM3 10.10.10.18 192.168.1.252

Once there, open a browser and to view, type in 10.10.10.9 in address bar. Externally, 198.74.252.150, login using creds from our IT Manual.

Adding older cameras

To add older Axis cameras, select Driver Generic RTSP and use this URL:

• rtsp://ip_address/mpeg4/media.amp (substituting in the camera’s IP address)

Camera IP Ranges

• Exterior N 192.168.1.2 – 1.09

• Exterior E 1.10 – 1.19

• Exterior S 1.20 – 1.29

• Exterior W 1.30 – 1.39

• NC Hallways 1.40 – 1.59

• SC Hallways 1.60 – 1.79

• UC Hallways 1.80 – 1.99

• NC Rooms 1.100 – 1.154

• Cafeteria 1.155 – 1.158

• SC Rooms 1.159 – 1.199

• UC Rooms 1.200 – 1.240